search

LSI U160 Bedienungsanleitung Seite 57

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 90
  • Inhaltsverzeichnis
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 56
3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 p
c
52.5 pc
34.5 pc
44.25 pc
The LSI Logic SCSI BIOS Configuration Utility Menus 3-13
Table 3.4 lists the fields and their descriptions.
Table 3.4 Device Properties Fields and Descriptions
Field
Field Type
[Value] Description
SCSI ID Information Device’s SCSI Identifier.
Device Identifier Information Indicates the ASCII device identifier string, as extracted
from the device’s inquiry data.
Mbytes/s Information Provides the maximum throughput of the device in
Mbytes/s.
Megatransfers/s Configuration
[0 / 5 / 10 / 20 / 40]
Indicates the maximum synchronous data transfer rate
in megatransfers per second.
Megatransfers Data Width Data Width Synch
per second = 8 bits = 16 bits Period (ns)
0 = Asynch 0 = Asynch 0 = Asynch 0 = Asynch
5 5 10 200
10 10 20 100
20 20 40 50
40 40 80 25
Data Width Configuration
[8 / 16]
Maximum data width in bits.
Scan ID Configuration
[Yes / No]
Indicates whether to scan for this SCSI identifier at boot
time. Utilizing this setting allows you to ignore a device.
This decreases boot time by disabling inquiry of unused
SCSI identifiers.
Set this option to No if there is a device that you do not
want to be available to the system. Also, on a bus with
only a few devices attached, the user can speed up boot
time by changing this setting to No for all unused SCSI
IDs.
Scan LUNs > 0 Configuration
[Yes / No]
Indicates whether to scan for LUNs greater than zero for
a device. LUN 0 is always queried. This option should
be used if a multi-LUN device responds to unoccupied
LUNs or if it is desired to reduce the visibility of a
multi-LUN device to LUN 0 only.
Set this option to No if you have problems with a device
that responds to all LUNs whether they are occupied or
not. Also, if a SCSI device with multiple LUNs exists on
your system but you do not want all of those LUNs to be
available to the system, then set this option to No. This
will limit the scan to LUN 0.
Seitenansicht 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare
  • Blossom BNC C-Bus DampRid Hawke Sport Optics
  • Nikon Empfänger Quantum NAS & Speicherserver Logitech Überspannungsschutz Genie Gefrierschränke Dell Motorradzubehör
  • LG MS-196V Canon CANOSCAN LIDE 700F LG V500 Maytag 750
  • Sony VGC-LT31N Einstellungsanleitung Zanussi ZWY61225BW Bedienungsanleitung Grizzly G1276 Bedienungsanleitung Canon imagePROGRAF iPF8300 Einstellungsanleitung Asus MEW-B Bedienungsanleitung