LSI U80ALVD Bedienungsanleitung PDF herunterladen (Seite 47)

Starting the SCSI BIOS Conﬁguration Utility 3-5

Figure 3.2 Change Status on Next Boot Menu

To change an adapter's status, select it and press Enter. Then press the

Escape (Esc) key to exit from this menu.

3.2.1.2 Adapter Boot Order

Adapter Boot Order allows the user to set the order in which host

adapters will boot when you have more than one LSI Logic host adapter

in your system. When this option is selected, the Boot Order menu

appears. Figure 3.3 is an example of the Boot Order menu:

Figure 3.3 Boot Order Menu

To change an adapter's boot order, select it and press Enter. You are

then prompted to enter the new boot sequence number. To remove an

adapter's boot order, press Enter again rather than entering a new

sequence number. While the maximum capacity is 32 adapters, only 0

through 3 can be assigned a boot order. If an invalid number is entered,

an error message appears. When the adapters are ordered as desired,

press the Escape (Esc) key to exit from this menu.

Main Menu

Change Status on Next Boot:

Port

Num

Irq---------Status--------NVRAM

Level Current Next-Boot Found

LSI53C895A

LSI53C896

FC00

F800

F801

Off

Yes

Main Menu

BootSeq Bus DevFunc BootSeq Bus DevFunc

0 LSI53C895A 00 A0 1 LSI53C896 00 98

2 LSI53C896 00 90

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 77 78

Keine Kommentare

LSI U80ALVD Bedienungsanleitung Seite 47